Stitching. basically, stitch and glue boats are constructed by gluing panels of plywood together using epoxy resin and fiberglass. the stitching is used to hold the panels in place while the glue is applied and allowed to cure.. Stitch and glue is a simple boat building method which uses plywood panels stitched together, usually with copper wire, and glued together with epoxy resin. this type of construction can eliminate much of the need for frames or ribs.. Our stitch and glue boat building videos take you step-by-step through the process of building a stitch and glue boat with boat builder/ designer bill thomas. bill takes you through the process of building his fox double-paddle canoe design..
The boatbuilding operation he started with his wife on a shoestring in 1977 has flourished, and devlin designing boat builders each year rolls out between 20 and 40 stitch-and-glue boats of various sizes from its shop on the shores of puget sound.. A stitch and glue boat hull is made of plywood panels assembled with fiberglass tape. contrary to traditional boat building in which molds define the hull shape, in stitch and glue, the hull panels define the shape .. Basic "stitch-and-glue" manual this manual describes the building of a small boat by the "stitch-and-glue" method, also known as "taped seams". the method originated in england in the early 60's and the first boat built was a mirror dinghy designed by jack holt. in traditional boatbuilding the builder needs to transfer.
0 komentar:
Posting Komentar