Building the Optimist dinghy frames

| |
Winter is flying by, and we are diving into our three-boats-at-once project. We have spent some time getting to know the CABBS plans. Its helped to have found some pretty nice images of other folks working on their Optimists. Nothing like a picture to make things clearer.

Here is where we would like the project to be the next time we get to work on the Optimists:


Pictured below in red are the frame stations that we are working on in the accompanying video, and how they will support the other members. We have completed the bow frames (1) and attached the bows to the strongback. The bow must be angled back at 22 degrees as can be seen below. The rest of the frames (2 and 3) are perpendicular to the strongback.




If any readers happen to stop by and read this post and watch the accompanying video, feel free to leave a comment about the "real" way to build these prams. My brothers and I have sailed boats and fixed-up wooden boats, but weve never attempted to build any from plans. This has been a fun and challenging experience so far.

You may notice from the video that we have been using scrap lumber. We have a lot of odds and ends of wood lying around, so to save on cost we have used old lumber as much as possible. We need these boats to last about ten years - we will see...

Related Posts by Categories

0 komentar:

Posting Komentar